Bostik-Watertite 

Water proofing/tanking system for walls and floors

Introduction and Applications

Power showers, shower cubicles, steam rooms, wet rooms made of water sensitive materials in hotels, guest houses, leisure centres, fitness centres, at work and even in our domestic environments are at risk of water penetration which puts these installations at great risk
  

It is often felt that the use of a water resistant pastes or cementitious adhesive and grout will suffice.  This is not true. These materials will only resist the effects of water passage for a certain time. Power showers can generate a considerable amount of pressure, which can saturate the grout and adhesive and penetrate the substrate, subsequently causing failure of the tiling installation.  A more comprehensive measure is then needed to prevent water penetration.  This is why we recommend Bostik-Watertite tanking/ waterproof system in such areas.
 

Suitable for industrial, commercial and domestic installations, Bostik-Watertite makes water tight a complete range of backgrounds both from ingress and leakagem including:

• Gypsum plaster
• Plasterboard
• Timber based backgrounds
• Concrete
• Sand/Cement render
• Fibreboard
• Anhydrite screeds
• Lightweight blocks
• Concrete Blocks
• Brickwork
• Steel

Features

• Easy to use
• Quick Drying
• Flexible
• For external use,
• Suitable for use with under floor heating
• Applied by brush or roller

5-litre pack includes;
Waterproofing polymer, sufficient for 2 coats (Coverage 5M²)
2 small flanges (for pipe work from 10mm to 50mm)
1 roll of 10cm wide x 25 metre long tape
1 M2 matting