Fast-Set

Thin and thick bed, fast setting tile adhesive.

Introduction and Applications

Biscem Fast-Set dries to form a strong bond for fixing ceramic wall and floor tiles, ceramic and glass mosaics, terrazzo tiles and slabs, brickslips, natural and artificial stone cladding and concrete tiles to a wide range of materials such as dense concrete, clay bricks, aerated concrete, blockwork, masonry, sand/cement render and plasterboard.  Biscem Fast-Set is also suitable for fixing rigid foam materials such as polystyrene, polyurethane and glass wool slabs.  .
 

Fast-Set may also be used with Biscem Flexibond emulsion to produce a flexible mortar.  Fast-Set should not be used externally or in installations which are continuously immersed in water

Biscem Fast-Set is Ideal for fast track applications as it is sufficiently hard that tiles can be grouted after only 2 hours

For most applications Biscem Fast-Set tile adhesive requires only the addition of clean water.

Quality and Standards

Fast-Set conforms to:

• BS 5980 Type 1 Class AA - Adhesives for use with Ceramic Tiles and Mosaics.
• BS 5385 Part 1 : 1976 Wall tiling - Internal Ceramic Wall Tiling and Mosaics in Normal Conditions.
• BS 5385 {art 4: 1986 - Ceramic Tiling and Mosaics in Specific Conditions.
• DIN 18-156m Adhesive Mortar.

Biscem Fast-Set tile adhesive is manufactured under a BSI approved quality system to EN ISO 9002 & conforms to the requirements of BS 5980 Type 1 Class AA.

Features

• Rapid Setting: can be grouted after only 2 hours.
• Easy to Mix: requiring only mixing water and a suitable paddle mixer and paddle.
• Versatile: can be applied onto most dry, sound and rigid internal sub-strates.
• Available in white for use with translucent marble and natural stone tiles.