Biscemlogo

Wide Joint Grout

Cementitious wide joint tile grout.

Introduction and Applications

A specially prepared water resistant tile grout for internal and external ceramic wall and floor tile applications where tile joints are between 3mm and 15 mm. Available in numerous colours, the range can be used to match or contrast with most glazed, handmade or natural and natural effect tiles.

Biscem Wide Joint Grout is water resistant, with a high degree of abrasion resistance and has a low porosity offering good resistance to dirt penetration.

Can be modified with Flexibond to produce a water resistant, flexible grout.

Quality and standards

Biscem Wide Joint Grout is manufactured under a BSI approved quality system to EN ISO 9002.

Features

Easy to mix: mix easily with clean water to give a useable paste.
Colours: good range of colours to suit most applications.
Joint Width: formulated to be used in a joints up to 15 mm.
Durable: can be used in both internal and external applications

Colours	Grey, Sandstone, Limestone, Brown, White, Anthracite and Ivory
Joint Width	3-15mm
Open Time	45 minutes
Coverage	This depends on the width and depth of the joints to be grouted and the size of the tiles
Shelf life	12 months when stored in a cool place unopened

Useful information

For use with tiles of low absorbency such as porcelain, quarries and some natural stones, e.g. slates, mix Flexibond with the mixing water at a ratio of 1:5.

Coverage depends on thickness and depth of tile joint, e.g. 150 x 150 mm tiles with joint width 10 mm and depth 8 mm requires nearly 2 kg per square metre.